| Section 1 Identification |
| Product Number: | C1266 |
| Health: | 2 |
| Flammability | 1 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Antimony Metal Lumps |
| Trade/Chemical Synonyms | |
| Formula: | Sb |
| RTECS: | CC4025000 |
| C.A.S | CAS# 7440-36-0 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Antimony Metal | CAS# 7440-36-0 | 100% | W/W | OSHA TWA 0.5 (as Sb) mg/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed. |
| Section 4 First Aid Measures |
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | Dust at sufficient concentrations can form explosive mixtures with air. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Evacuate area. Wear self-contained breathing apparatus and protective clothing. Eliminate all sources of ignition.
|
| Section 7 Handling and
Storage |
| Store in a cool dry place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:NIOSH/MSHA-approved respirator
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 630°C | Specific Gravity | 6.68
|
| Boiling Point: | 1440°C |
Percent Volatile by Volume: | information not available |
| Vapor Pressure: | 1mm Hg @ 886°C |
Evaporation Rate: | N/E |
| Vapor Density: |
information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Soluble |
Auto ignition Temperature: |
N/A |
| Appearance and Odor: |
Silver grey metallic particles, no odor |
Lower Flamm. Limit in Air: |
1.2% |
| Flash Point: |
N/A |
Upper Flamm. Limit in Air: |
10.0% |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Avoid contact with heat, sparks, flames, or other sources of ignition. |
Materials to Avoid:
Acids, halogens, nitrates, potassium permanganate, peroxides |
Hazardous Decomposition Products:
Stilbene fumes (SbH3) |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Conditions aggravated/target organs: Persons with preexisting skin, eye, respiratory or kidney and liver disorders may be more susceptible. Acute: Irritation possible to skin, eyes, mucous membranes, respiratory and GI tracts. Headache, dizziness, nausea |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|