Material Safety Data Sheet
Science Stuff, Inc.
1104 Newport Ave
Austin, TX 78753
Phone (512) 837-6020
Chemtrec 800-424-9300
24 Hour Emergency Assistance
Section 1 Identification
Product Number:C1479 
Hazard Rating:
NA = Not Applicable NE = Not Established
Product Name:Charcoal, Coconut Activated, 8-12 Mesh 
Trade/Chemical Synonyms 
C.A.SCAS# 7440-44-0
Section 2 Component Mixture
Sara 313ComponentCAS Number%DimExposure Limits:
Charcoal, Coconut Activated, 8-12 Mesh CAS# 7440-44-0 100% W/W None established 
Section 3 Hazard Identification (Also see section 11)
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed. 
Section 4 First Aid Measures
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.

FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.

EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen

INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5 Fire Fighting Measures
Fire Extinguisher Type:Carbon Dioxide, dry chemical powder or appropriate foam
Fire/Explosion Hazards:Fire possible at elevated tepuratures. Dust in sufficient quantities can be a dust explosion hazard.
Fire Fighting Procedure:Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing.
Section 6 Accidental Release Measures
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
Section 7 Handling and Storage
Store in a cool dry well ventilated area. Keep away from heat and flame, and oxidizing agents. Do not get in eyes, on skin, or on clothing.Brush off excess that clings; then wash thoroughly. 
Section 8 Exposure Controls & Personal Protection
Respiratory Protection:Dust respirator
Ventilation: Mechanical: Hand Protection:Wear appropriate gloves to prevent skin exposure
Local Exhaust: Eye Protection:Saftey goggles
Other Protective Equipment: Wear appropriate clothing to prevent skin exposure
Section 9 Physical and Chemical Properties
Melting Point:3500 Deg. CSpecific GravityN/A
Boiling Point:N/A Percent Volatile by Volume:N/A
Vapor Pressure:N/A Evaporation Rate:N/A
Vapor Density: N/A Evaporation Standard:
Solubility in Water: Insoluble Auto ignition Temperature: Not applicable
Appearance and Odor: Black powder, odorless Lower Flamm. Limit in Air: Not applicable
Flash Point: N/A Upper Flamm. Limit in Air: Not applicable
Section 10 Stability and Reactivity Information
Stability: StableConditions to Avoid: Avoid contact with incompatible materials, And dusting, as dust particles can form explosive mixture with air.
Materials to Avoid:
Oxidizing materials
Hazardous Decomposition Products:
Oxides of carbon
Hazardous Polymerization:Will Not Occur
Condition to Avoid:None known
Section 11 Additional Information
Inhalation may irritate nasal and respiratory passages. Contact may irritate skin and eyes. Conditions aggravated/target organs: Persons with pre-existing eye, skin, or respiratory conditions may be more susceptible. 
DOT Classification: Not Regulated
DOT regulations may change from time to time. Please consult the most recent version of the relevant regulations.
Revision No:0Date Entered: 9/1/2006 Approved by: WPF

The information contained herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty is expressed or implied regarding the completeness or accuracy of this information, whether originating from Science Stuff, Inc. or from an alternate source. Users of this material should satisfy themselves by independent investigation of current scientific and medical information that this material may be safely handled.