| Section 1 Identification |
| Product Number: | C1638 |
| Health: | 3 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Cupric Chloride Anhydrous Laboratory Grade |
| Trade/Chemical Synonyms | |
| Formula: | CuCl’ |
| RTECS: | GL7000000 |
| C.A.S | CAS# 7747-39-4 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Cupric Chloride Anhydrous | CAS# 7747-39-4 | 100 % | W/W | ACGIH TWA 1 mg(Cu)/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with adequate ventilation. Wash thoroughly after use. Keep container closed. |
| Section 4 First Aid Measures |
May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with adequate ventilation. Wash thoroughly after use. Keep container closed.
FIRST AID: CALL A PHYSICIAN. SKIN: Remove contaminated clothing. Wash exposed area with soap and water.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconcious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | When involved in a fire, this material may decompose and produce corrosive and /or toxic gases. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
|
| Section 7 Handling and
Storage |
| Keep container tightly closed when not in use. Store containers in a cool, dry location, away from direct sunlight,sources of intense heat, or where freezing is possible. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:NIOSH/MSHA-approved respirator
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 110°C | Specific Gravity | 2.51
|
| Boiling Point: | Decomposes |
Percent Volatile by Volume: | 0 |
| Vapor Pressure: | Practically zero |
Evaporation Rate: | 0 |
| Vapor Density: |
N/A |
Evaporation Standard: |
|
| Solubility in Water: |
110 g/100 cc @ 0°C |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Blue green crystals or powder |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
decomposes |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: High temperatures and incompatibiities |
Materials to Avoid:
Potassium, sodium, and ammonia. |
Hazardous Decomposition Products:
Hydrogen chloride and copper oxides |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Effects of overexposure. Acute and chronic: Harmful or fatal if swallowed. Material is a eye and skin irritant and can cause burns.May also be harmful to respiratory tract, and if inhaled may cause nose irritation, sore throat, coughing, and chest tightness and possibly , ulceration and preforation of the nasal septum. Chronic: Long term skin overexposure to this product may lead to dermatitis and eczema and may result in discoloration of skin or hair. Prolonged eye contact may cause conjunctivitis and possible corneal abnormalities.Target organs: Liver and kidney.Persons with pre-existing disorders may be more susceptible. |
| DOT Classification: Copper Chloride, 8, UN2802, PG III |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|