| Section 1 Identification |
| Product Number: | C1745 |
| Health: | 1 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Ferric Oxide Red Laboratory Grade, Powder |
| Trade/Chemical Synonyms | |
| Formula: | Fe’O“ |
| RTECS: | NO7400000 |
| C.A.S | CAS# 1309-37-1 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Ferric Oxide Red | CAS# 1309-37-1 | 100% | w/w | OSHA TWA 10 mg/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation. |
| Section 4 First Aid Measures |
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but it is not necessary to induce. Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Water |
| Fire/Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
|
| Section 7 Handling and
Storage |
| Keep container closed when not in use. Store in a cool , dry , will ventilated area wash thoroughly after handling. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:Dust mask
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 1565 Deg C | Specific Gravity | 5.1
|
| Boiling Point: | Information not available |
Percent Volatile by Volume: | 0 |
| Vapor Pressure: | Information not available |
Evaporation Rate: | 0 |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Insoluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Dark red , odorless powder or lumps |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Nonflammabale |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: None known |
Materials to Avoid:
None |
Hazardous Decomposition Products:
Not known to occur |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Prolonged or repeated contact or acute inhalation may cause skin irritaition or pulmonary edema or benign pneumoconiosis. If comes in contact with skin, wash with soap and water. If comes in conatact with eyes flulsh with water. In inhaled move to fresh air. If ingested seek medical attention. Persons with pre-existing disorders may be more susceptible. |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|