| Section 1 Identification |
| Product Number: | C1918 |
| Health: | 2 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Iodine 0.125 Normal |
| Trade/Chemical Synonyms | |
| Formula: | N/A |
| RTECS: | None |
| C.A.S | See Below |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | V/V | None Established |
|
Iodine | CAS# 7553-56-2 | 1.58% | W/V | OSHA PEL (C) 0.1 ppm (1 mg/mƒ |
|
Potassium Iodide | CAS# 7681-11-0 | 5% | W/V | TXDS: orl-hmn LDLo: 1862 mg/Kg |
|
| Section 3 Hazard Identification (Also
see section 11) |
| May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed. |
| Section 4 First Aid Measures |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | Not combustible, however, contact with reducing agents or combustibles may cause ignition. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Neutralize iodine by adding sodium thiosulfate solution until iodine color is gone. Pick up with absorbent material.
|
| Section 7 Handling and
Storage |
| Store in a cool dry place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | ~0° C | Specific Gravity | > 1
|
| Boiling Point: | ~100° C |
Percent Volatile by Volume: | ~ 95% |
| Vapor Pressure: | Information not available |
Evaporation Rate: | Information not available |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Soluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
brown liquid/Iodine odor |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Information not available |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Avoid exposure to light. |
Materials to Avoid:
Active metals, ammonia, acetylene, acetaldehyde |
Hazardous Decomposition Products:
Iodine fumes |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Conditions aggravated/target organs: Persons with pre-existing skin, eye, thyroid, and respiratory disorders, as well as persons with iodine allergies, will be more susceptible. May cause skin and eye irritation. Conditions aggravated: Thyroid disorders, iodine allergies. |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|