| Section 1 Identification |
| Product Number: | C1985 |
| Health: | 3 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Lead Sulfide |
| Trade/Chemical Synonyms | |
| Formula: | PbS |
| RTECS: | OG4550000 |
| C.A.S | CAS# 1314-87-0 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Lead Sulfide | CAS# 1314-87-0 | 100% | W/W | OSHA PEL 0.05 mg(Pb)/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. |
| Section 4 First Aid Measures |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal. Wash remainder away with copious amounts of water and detergent.
|
| Section 7 Handling and
Storage |
| Keep container tightly closed. Keep away from food, drink and animal stuffs. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:OSHA approved dust mask
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 1114°C | Specific Gravity | 7.5
|
| Boiling Point: | 1281°C |
Percent Volatile by Volume: | N/A |
| Vapor Pressure: | 1mm Hg @ 852°C |
Evaporation Rate: | N/A |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Insoluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Gray powder |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
N/A |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Avoid contact with incompatible materials. |
Materials to Avoid:
Iodine chloride, Hydrogen peroxide |
Hazardous Decomposition Products:
Not known to occur |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Acute: May cause irritation. Harmful if inhaled or swallowed. Chronic: Slight chance for systemic poisoning. Conditions aggravated/target organs: Persons with pre-existing eye, skin or respiratory conditions may be more susceptible. |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0.2 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|