| Section 1 Identification |
| Product Number: | C2153 |
| Health: | 3 |
| Flammability | 0 |
| Reactivity | 1 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Nessler's Reagent Solution |
| Trade/Chemical Synonyms | |
| Formula: | N/A |
| RTECS: | None |
| C.A.S | See Below |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | V/V | None Established |
|
Mercuric Iodide Red | CAS# 7774-29-0 | 10% | W/V | OSHA TWA 0.1 mg(Hg)/mƒ |
|
Potassium Iodide | CAS# 7681-11-0 | 7% | W/V | TXDS: orl-hmn LDLo: 1862 mg/Kg |
|
Sodium Hydroxide | CAS# 1310-73-2 | 16% | W/V | OSHA PEL 2 mg/mƒ ACGIH 2mg/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with adequate ventilation. Wash thoroughly after use. Keep container closed. |
| Section 4 First Aid Measures |
May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with adequate ventilation. Wash thoroughly after use. Keep container closed.
FIRST AID: CALL A PHYSICIAN. SKIN: In case of contact, immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Thoroughly clean clothing and shoes before reuse.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconcious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | None |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Absorb spill with inert material, then place in a chemical waste container. Neutralize with a weak acid. Hold for heavy metal disposal.
|
| Section 7 Handling and
Storage |
| Wash thoroughly after handling. Remove contaminated clothes and wash before reuse. Use with adequate ventilation. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | <2°C | Specific Gravity | Information not available
|
| Boiling Point: | >98°C |
Percent Volatile by Volume: | 83% |
| Vapor Pressure: | Information not available |
Evaporation Rate: | Information not available |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Soluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Clear yellow liquid |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Information not available |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Contact with Incompatible substances |
Materials to Avoid:
Oxidizing materials, acidic conditions |
Hazardous Decomposition Products:
Toxic fumes of: Mercury |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Condtions aggravated/target organs: Persons with pre-existing skin, eye, or respiratory disorders are more susceptible. Acute: Irritation and burns to skin, eyes, digestive tract. Mercury poisoning. Mists may cause respiratory irritation. Chronic: Dermatitis, eye damage, skin damage, mercury poisoning. |
| DOT Classification: Corrosive Liquid,toxic,n.o.s.(Sodium Hydroxide, Mercuric Iodide) 8, UN2922, PG II |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|