| Section 1 Identification |
| Product Number: | C2465 |
| Health: | 1 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Silica Gel 60-200 Mesh Grade 62 Chromatographic Grade |
| Trade/Chemical Synonyms | |
| Formula: | N/A |
| RTECS: | VV7315000 |
| C.A.S | CAS# 1343-98-2 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Silica Gel 60-200 Mesh Grade 62 | CAS# 1343-98-2 | 100% | W/W | TLV 6 mg/mƒ (total dust) |
|
| Section 3 Hazard Identification (Also
see section 11) |
| Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation. |
| Section 4 First Aid Measures |
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but it is not necessary to induce. Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
|
| Section 7 Handling and
Storage |
| Store in a cool dry place. This Material is not considered hazardous. Handle using safe laboratory practices. Keep containers tightly closed. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 1710 Deg C | Specific Gravity | 2.2 - 2.6
|
| Boiling Point: | 2230 Deg C |
Percent Volatile by Volume: | 0 |
| Vapor Pressure: | N/A |
Evaporation Rate: | N/A |
| Vapor Density: |
N/A |
Evaporation Standard: |
|
| Solubility in Water: |
Insoluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Clear blue odorless crystals |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Not flammable |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Avoid contact with incompatible materials. |
Materials to Avoid:
Fluoruides, Hydrochloric acid, strong oxidizers, vinyl acetate |
Hazardous Decomposition Products:
Silicon Oxide |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Dust may cause irritation. Ingestions may cause gastrointestinal irritation, naused vomiting and diarrhea. Inhalation: Dust is irritating to the respiratory tract. Low hazard for industrial use. Target organs: None. Chronic effects: None known. |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|