| Section 1 Identification |
| Product Number: | C2675 |
| Health: | 2 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Sodium Persulfate 0.6 Molar Aqueous Suitable For T.O.C. Analysis |
| Trade/Chemical Synonyms | |
| Formula: | N/A |
| RTECS: | None |
| C.A.S | See Below |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | V/V | None Established |
|
Sodium Persulfate | CAS# 7775-27-1 | 14.3% | W/W | ACGIH TWA 5 mg(S’O˜)/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| Heat, shock, friction, or contact with other materials may cause fire or explosion. Harmful if swallowed. Avoid breathing vapor or dust. Use adequate ventilation. Avoid contact with eyes, skin or clothes. Wash thoroughly after handling. Keep closed. |
| Section 4 First Aid Measures |
Heat, shock, friction, or contact with other materials may cause fire or explosion. Harmful if swallowed. Avoid breathing vapor or dust. Use adequate ventilation. Avoid contact with eyes, skin or clothes. Wash thoroughly after handling. Keep closed.
FIRST AID: SKIN: Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | Thermal decomposition produces highly toxic fumes. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.
|
| Section 7 Handling and
Storage |
| Store in a cool, dry, well-ventilated place away from incompatible materials. Wash thoroughly after handling. |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | Information not available | Specific Gravity | Information not available
|
| Boiling Point: | Information not available |
Percent Volatile by Volume: | ~85 |
| Vapor Pressure: | Information not available |
Evaporation Rate: | Information not available |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Soluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
Clear odorless liquid |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Not applicable |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Avoid contact with incompatible materials. |
Materials to Avoid:
Reducing agents, metals, strong bases, alcohols. |
Hazardous Decomposition Products:
Sulfur oxides |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| Persons with preexisting skin and eye conditions and those with persulfate allergy will be more susceptible. Conditions aggravated: Persulfate allergy. Acute Hazards: Irritating to skin, eyes and respiratory tract. Eczema and asthma reactions in sensitive individuals. Chronic hazards: Dermatitis, eye damage, possible sensitization. |
| DOT Classification: Oxidizing Liquid, n.o.s.(Sodium Persulfate Solution), 5.1, UN3139, PG III |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|