| Section 1 Identification |
| Product Number: | C2867 |
| Health: | 0 |
| Flammability | 0 |
| Reactivity | 0 |
Hazard Rating:
| Least | Slight | Moderate | High | Extreme |
| 0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
| Product Name: | Tin Metal 30 Mesh Reagent A.C.S. |
| Trade/Chemical Synonyms | |
| Formula: | Sn |
| RTECS: | XP7320000 |
| C.A.S | CAS# 7440-31-5 |
| Section 2 Component Mixture |
| Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Tin Metal 30 Mesh | CAS# 7440-31-5 | 100 % | W/W | OSHA PEL 2 mg/mƒ |
|
| Section 3 Hazard Identification (Also
see section 11) |
| May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed. |
| Section 4 First Aid Measures |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
|
| Section 5 Fire Fighting Measures |
| Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
| Fire/Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
| Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
|
| Section 7 Handling and
Storage |
| Store in a cool dry place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling |
| Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:NIOSH/MSHA-approved respirator
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
| Section 9 Physical and Chemical Properties |
| Melting Point: | 1630 Deg C | Specific Gravity | 6.95
|
| Boiling Point: | Sublimes 1800-1900 Deg C |
Percent Volatile by Volume: | 0 |
| Vapor Pressure: | Information not available |
Evaporation Rate: | 0 |
| Vapor Density: |
Information not available |
Evaporation Standard: |
|
| Solubility in Water: |
Insoluble |
Auto ignition Temperature: |
Not applicable |
| Appearance and Odor: |
White or silver grey powder with no odor |
Lower Flamm. Limit in Air: |
Not applicable |
| Flash Point: |
Not flammable |
Upper Flamm. Limit in Air: |
Not applicable |
|
| Section 10 Stability and Reactivity Information |
| Stability: Stable | Conditions to Avoid: Incompatibilities |
Materials to Avoid:
Chlorine , turpentine |
Hazardous Decomposition Products:
Not known to occur |
| Hazardous Polymerization:Will Not Occur |
| Condition to Avoid:None known |
|
| Section 11
Additional Information |
| May cause coughing , choking, and possibly irritating to respiratory tract. May result in stannosis, a form of Pneumocnisis. Incase of contact with skin or eyes wash with water for atleast 15 minutes. If inhaled remove to fresh air. If ingested wash mouth out water. Do not induce vomiting get medical assistance immediately. Person with pre-existing disorders may be more susceptible. |
| DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
| Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|